Flow Meters : FlowX3 F3.60M.S

 

The new FLOWX3 F3.60M.S Insertion Magmeter is provided with an USB interface and a dedicated software (freely downloadable from FLS web site) which allows to easily set by a PC all parameters according to specific installation requirements.
 
The new F3.60M.S can provide three different options:  frequency output to be connected to FLS flow monitors, 4-20 mA output  for long distance transmission and PLC connection and the new volume pulse output freely settable.

No moving mechanical parts and the high quality materials allow the measurement of liquids where suspended solids can be present or of abrasive liquids as long as they are conductive and homogeneous.

The sensor can be installed in both metal and thermoplastic pipelines, through standard FLS fittings and is perfectly interchangeable with the paddlewheel sensors allowing an accurate flow measurement  over a wide dynamic range in pipe sizes from DN15 (0.5”) to DN600 (24”).

Main Features

  • No moving parts, no wear, maintenance free.
  • High mechanical resistance.
  • Accurate measurement of dirty liquids.
  • For DN15 (0.5”) to DN600 (24”) pipes.
  • Flow Rate Range settable from 0.05 to 8 m/s (0.15 to 25 ft/s).
  • Low pressure drop.
  • Operating parameters settable by the user by PC interface.
  • 4-20 mA, frequency or volume pulse outputs.
  • Bi-directional flow measurement selectable.
  • Special versions for salt-water applications (high concentrations of chlorides like sea water) and for high temperature conditions.

 

Applications

  • Water and waste water treatment
  • Raw water intake
  • Industrial water distribution
  • Textile industry
  • Pools, spas and aquariums
  • HVAC
  • Processing and manufacturing industry
  • Sea water applications.

 

Downloads

 

Compatible Instrumentation

 

 

 

 

Cr : http://www.flsnet.it/