Manual Valves : Gate Valves

ASAHI Valves | Control Valves

These valves operate by rotating the hand-wheel. Rising stem gate valve hand-wheels move up and down at a right angle to the fluid flow. The valves inside diameter matches that of the piping used.

Gate Valves Product List

GATE VALVE TYPE-P (Plug) (32-350mm)[1 1/4-14inch]

High Corrosion and Impact-resistance

All wet sections are made of corrosion-resistant material, thus preventing corrosion and turbid water due to rust, The GATE VALVE, made of high impact polyvinyl chloride, can be used for water supply and drainage.

Light and Rugged Structure

Being made of synthetic resin, the ASAHI AV GATE VALVE is about 1/5 as heavy as a cast iron gate valve. However, the ASAHI AV GATE VALVE gives the same torque strength as a cast iron gate valve, so it endures high torque.

GATE VALVE TYPE-S (Soft Seal) (50-200mm) [2-8inch]

Reliable Watertightness

The rubber valve seat, a soft seal type, offers reliable shut-off.

Provides Smooth Flow

Being free of cavities, the valve body has no sand or foreign matter build up in it, thus providing a smooth flow.

GATE VALVE (Rising Stem) (40-200mm)[1 1/2-8inch]

A externally threaded stem and straight flow channel prevent foreign matter deposits and restrictions through.

Cr : http://www.asahi-yukizai.co.jp/en/