Counter/Timer : F/L Series

DIN W72×H72, W144×H72mm of 8 Digit Up/Down counter

DIN W72×H72, W144×H72mm of 8 Digit Up/Down counter

DIN W72×H72, W144×H72mm up/down counter F/L series is the DIN standard counters realizing wide display range up to 8-digit. The series also supports 1cps/30cps/2kcps/5kcps countering speed and NPN/PNP input selection function.

*8Digits counter with DIN size
*Up/Down/UPUDOWN count function
*Counting speed : 1cps/30cps/2kcps/5kcps
*Selectable voltage input(PNP) or no-voltage input(NPN)
*Decimal point setting(Fixed decimal point of display)
*Wide range of input power supply :
100-240VAC 50/60Hz, 12-24VAC/DC
*Built-in Microprocessor

Product Overview

Specification Table

Model	Single preset		F8A	L8A
	Totalizer(lndicator)		F8B	L8B
Digit			8digit
Digit size			W4xH8mm W6.3xH10mm
Power supply			100-240VAC 50/60Hz, 12-24VAC/DC(Option)
Allowable voltage range			90 to 110% of rated voltage
Power consumption			• Single preset : Approx. 6.1VA(240VAC 60Hz), Approx. 3.1W(24VDC), Approx. 6.3VA(24VAC 60Hz) • Indicator : Approx. 5.4VA(240VAC 60Hz), Approx. 2.6W(24VDC), Approx. 5.5VA(24VAC 60Hz)
Max.counting speed			Selectable 1cps/30cps/2kcps/5kcps by Internal DIP switch
Min. signal width	RESET input		Approx. 20ms
Input type	CP1.CP2 Input		[Voltage input] Input impedance : 5.4kΩ, "H" level voltage : 5-30VDC, "L" level voltage : 0-2VDC [No-Voltage input] Impedance at short-circuit : Max. 1kΩ, Residual voltage at short-circuit : Max. 2VDC, RESET input Impedance at open-circuit : Min. 100kΩ
	RESET input
One-shot output time			0.05 to 5sec
Control output	Con-tact	Type	Single preset : SPDT(1c)
		Capacity	250VAC 3A resistive load
	Solid-state	Type	Single preset type : 1 NPN open collector
		Capacity	30VDC Max. 100mA Max.
Memory protection			10 years(When using non-volatile semiconductor memory)
External power			12VDC±10% 50mA Max.
Environ-ment	Ambient temperature		-10 to 55℃, storage: -25 to 65℃
	Ambient humidity		35 to 85%RH, storage: 35 to 85%RH
Insulation resistance			100MΩ(at 500VDC megger)
Noise strength	AC power		±2kV the square wave noise(pulse width : 1㎲) by the noise simulator
	DC power		±500V the square wave noise(pulse width : 1㎲) by the noise simulator
Vibration	Mechanical		0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1 hour
	Malfunction		0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes
Shock	Mechanical		300m/s²(Approx. 30G) in each of X, Y, Z directions for 3 times
	Malfunction		100m/s²(Approx. 10G) iin each of X, Y, Z directions for 3 times
Relay life cycle	Mechanical		Min. 10,000,000 operations
	Electrical		Min. 100,000 operations(250VAC 3Aat resistive load)
Unit weight	AC power		F8A: Approx. 287g, F8B : Approx. 253g	L8A : Approx. 500g, L8B : Approx. 446g
	DC power		F8A: Approx. 283g, F8B : Approx. 253g	L8A : Approx. 498g, L8B : Approx.444g

Cr. : http://www.autonics.com/