Counter/Timer : AT8PSN/AT8PMN Series

DIN W48×H48mm Solid-State, Power OFF Delay TIMER

DIN W48×H48mm Solid-State, Power OFF Delay TIMER

The Best Timing Technology

*Time setting range (AT8PSN : 0.5~10sec, AT8PM : 0.5~10min)
*It is available to read the setting time and time range with simple operation. 
*Power supply : 100-120VAC 50/60Hz, 200-240VAC 50/60Hz, 100/110VDC, 48VDC, 24VDC
*Application : Protect circuit when momentary power failure and start it again.

Specification Table

Model ATS8PSN-□ ATS8PMN-□
Function Power OFF Delay
Control time setting range 0.05 to 10 sec. 0.05 to 10 min.
Power supply •100-120VAC 50/60Hz • 200-240VAC 50/60Hz
• 100/110VDC • 24VAC 50/60Hz, 24VDC
Allowable voltage range 90 to 110% of rated voltage
Power consumption • 100-120VAC : 1.5VA • 200-240VAC : 1.5VA
• 100/110VDC : 0.8W • 24VDC : 0.2VA, 24VDC 0.2W
Timing operation Power OFF start type
Control output Contact type Time limit DPDT(2c)
Contact capacity 250VAC 3A resistive load
Relay life cycle Mechanical Min.10,000,000 operations
Electrical Min. 100,000 operations(250VAC 3A resistive load)
Repeat error Max. ±0.2 % ±10ms
Setting error Max. ±5% ±50ms
Voltage error Max. ±0.5%
Temperature error Max. ±2%
Insulation resistance 100MΩ(at 500VDC megger)
Dielectric strength 2000VAC 50/60Hz for 1 minute
Noise strength ±2kV the square wave noise(pulse width : 1㎲) by the noise simulator
Vibration Mechanical 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1 hours
Malfunction 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes
Shock Mechanical 300m/s²(Approx. 30G) in each of X, Y, Z directions 3 times
Malfunction 100m/s²(Approx. 10G) in each of X, Y, Z directions 3 times
Environ -ment Ambient temperature -10 to 55℃, storage: -25 to 65℃
Ambient humidity 35 to 85%RH, storage: 35 to 85%RH
Approval CE,UL
Unit weight Approx. 100g

※Environment resistance is rated at no freezing or condensation.

Cr. : http://www.autonics.com/