Specification Table
| Model |
ATE - s
m
h |
ATE1 - s
m
h |
ATE2 - s
m
h |
| Function |
Power ON Delay |
| Control time setting range |
sec.(1, 3, 6, 10, 30, 60), min.(3, 6, 10, 30, 60), hour(3, 6, 12 ,24) |
| Power supply |
110/220VAC 50/60Hz |
110VAC, 220VAC 50/60Hz, 12VDC, 24VDC(Option) |
| Allowable voltage range |
90 to 110% of rated voltage |
| Power consumption |
Approx. 10VA(240VAC 60Hz), Approx. 2W(24VDC, 12VDC) |
| Reset time |
Max. 200ms |
| Timing operation |
Power ON start type |
| Control output |
Contact type |
Time limit SPDT(1c), Instantaneous SPST(1a) |
Time limit DPDT(2c) |
Time limit SPDT(1c), Instantaneous SPDT(1c) |
| Contact capacity |
250VAC 3A resistive load |
| Relay |
Mechanical |
Min. 10,000,000 operations |
| life cycle |
Electrical |
Min. 100,000 operations(250VAC 3A resistive load) |
| Repeat error |
Max. ±0.3% |
| SET error |
Max. ±5% ±0.05sec. |
| Voltage error |
Max. ±0.5% |
| Temperature error |
Max. ±2% |
| Insulation resistance |
100MΩ(at 500VDC megger) |
| Dielectric strength |
2000VAC 50/60Hz for 1 minute |
| Noise strength |
±2kV the square wave noise(pulse width : 1㎲) by the noise simulator |
| Vibration |
Mechanical |
0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 1 hours |
| Malfunction |
0.5mm amplitude at frequency of 10 to'55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes |
| Shock |
Mechanical |
300m/s²(Approx. 30G) in each of X, Y, Z directions for 3 times |
| Malfunction |
100m/s²(Approx. 10G) in each of X, Y, Z directions for 3 times |
| Environ-ment |
Ambient temperature |
-10 to 55℃, storage: -25 to 65℃ |
| Ambient humidity |
35 to 80%RH, storage: 35 to 80%RH |
| Unit weight |
Approx. 75g |
※Environment resistance is rated at no freezing or condensation.
Cr. : http://www.autonics.com/
|
