Photo Sensor : PA10 Series

Autonics | Photo Sensor / Level Sensors | View PDF

Multifunctional sensor controller

Multifunctional sensor controller

Easy control for sensors

*12 kinds of various operation modes selected by DIP S/W
*High speed input response
*Flip-flop function is built in for level control
*Multifunction type with Timer function
*DIN rail mounting and mountable without the rail
*Wide range of power supply(100-240VAC 50/60Hz)

Specification Table

Model		PA10-U	PA10-V	PA10-VP	PA10-W	PA10-WP
Power supply		100-240VAC 50/60Hz
Allowable operation voltage		90 to 110% of rated voltage
Power consumption		100VAC 50/60Hz: Max. 9VA(Condotion:12VDC/200mA resistive load), 240VAC 50/60Hz: Max. 10VA
Power for external sensor		12VDC ±10% Approx. 200mA
lnput(IN1)(IN2)		Selectable NORM/INV. Selectable OR/AND operation for IN1, IN2 Input. Selection function for IN2 derivative action.	Selectable NORM/INV. Operation for IN1, IN2 AND.		Selectable NORM/INV. Operation for IN1, IN2 AND.
		NPN input type	NPN input type	PNP input type	NPN input type	PNP input type
Input type		• PA10-U(No-voltage Input) Impedance at short-clrcuit:Max. 680Ω, Residual voltage at short-circuit:Max. 0.8V, Impedance at open:Min. 100kΩ • PA10-V/PA10-W(No-voltage Input) Impedance at short-clrcult:Max. 300Ω, Residual voltage at short-circuit:Max. 2V, Impedance at open:Mln. 100kΩ • PA10-VP/PA10-WP(Voltage Input) Input lmpedance:5.6kΩ, "H" level voltage:5-30VDC, "L" level voltage:0-2VDC
Output	Contact output	OUT : 250VAC 3A(resistive load)			OUT1, OUT2 : 250VAC 3A(reslstlve load)
	Solid-state output	O·C OUT1/O·C OUT2 : NPN open collector output Max. 30VDC 100mA	O·C OUT: NPN open collector output Max. 30VDC 100mA		-
Response time		Input: Min. 2㎲, Relay contact output: Min. 10ms, Transistor output: Min. 0.5㎲(When it is encoder mode)
Time setting function by each mode ※Only for PA10-U	Have	• ON Delay Mode • OFF Delay Mode • One-Shot Delay Mode • Flicker Mode • Flicker One-Shot Mode • Low-Speed Detection Mode • High-Speed Detection Mode • ON/OFF Delay Mode
	None	• Normal Mode • Flip-Flop Mode • Encoder(Mode 9 to 11)
Relay life cycle	Mechanical	Min. 10,000,000 operations
	Electrical	Min. 100,000 operatlons(250VAC 3A resistive load)
Dielectric strength		2000VAC 50/60Hz for 1 minute
Insulation resistance		Min. 100MΩ(at 500VDC megger)
Environ -ment	Ambient temperature	-10 to 55°C, storage: -25 to 60°C
	Ambient humidity	35 to 85%RH, storage: 35 to 85%RH
Unit weight		Approx. 150g			Approx. 160g

※ If the load is connected over 200mA at the sensor output, it may cause mechanical trouble.
※ Environment resistance is rated at no freezing or condensation.