Multifunction Power Transducer : CPT

CPT Power transducer provide single phase, 3 phase multiple parameters (such as voltage, current, active power, reactive power, apparent power, power factor, frequency, effective energy) input conversion, display and remote communication function. Standard equip with 1 RS485 communication output (Modbus RUT Mode), 1 Relay and 2 pulse outputs, optional 2 sets /4 sets of analogue output, comply to the needs in power management, remote input and output, alarm, remote controls applications.

Features

- Input 1P2W,1P3W,3P3W,3P4W Unbalanced load system s active power, reactive power, apparent power and electric energy (Watts-Hr) etc parameters.

- 1 set relay(SPDT) output, with 3 variable setting (R1.1/R1.2/R1.3), each react to setting parameters V.AVG/I.AVG/FREQ/P.TL/Q.TL/ S.TL / PF.AVG / AE.TL / RE.TL / VA / VB / VC / IA / IB / IC / PF-A / PF-B / PF-C / P-A / P-B / P-C / Q-A / Q-B / Q-C / S-A / S-B / S-C, having relay function : Hi / Lo / Hi Hold / Lo Hold / Do / OFF; further advance function , start delay, hysteresis, time delay, reset delay etc.

- 2 set of open collector pulse for Kilowatt-Hour and Kvar-hour output, maximum frequency 1000Hz.

- 4 analogues output same as relay setting parameters. Output range: Current0~10 / / / / mA 0~20 mA 4~20 mA 4~12~20 mA ± / ± 10 mA 20 mA Output range: Voltage 0~5V / 1~5 V / 0~10 V / 0~2.5~5 V / 1~3~5 V / 0~5~10 V / ± ± 5 V / 10 V

- Outer case wall mounting or din rail mounting(EN500022) Product design according to CE.

Application

Motor control/ panel power monitoring/ power consumption monitor and control/ power distribution system/ intelligent building & automation power management system power / testing equipment

CPT can be use for electric monitoring system (SCADA), measuring site parameters and remote control Standard industrial RS-485 communication interface, allow easy internet . connection best for SCADA system choice

Front panel and button info

Dimension

Cr. : http://www.csec.com.tw