Flow Meters : FlowX3 F3.60M.S
FIP FLOW X3 - Flow Meter / Flow Sensor / Flow Switch
Flow Meters : FlowX3 F111
FIP FLOW X3 - Flow Meter / Flow Sensor / Flow Switch
Flow Meters : FlowX3 F3.20
FIP FLOW X3 - Flow Meter / Flow Sensor / Flow Switch
Flow Meters : FlowX3 F3.00
FIP FLOW X3 - Flow Meter / Flow Sensor / Flow Switch
Butterfly Valves : Chem Valve Fluoropolymer Lined
Chemline Plastics - Control Valves
YS Series Y-Sediment Strainers
Chemline Plastics - Control Valves
The Chemline YSA Series Y Sediment Strainer is a safety filtration device designed to entrap occasional solid impurities in the line. This is to protect equipment with small orifices such as solenoid valves, and prevent damage to pumps or control valves, etc. The easily replaceable filter screen comes in a choice of meshes. The new YSA Series True Union models have greatly increased filtration areas. Pressure drops are lower and less frequent cleaning is required.
Butterfly Valves : Elastomer Seated
Chemline Plastics - Control Valves
Needle Valves
Chemline Plastics - Control Valves
Chemline N Series Needle Valves are designed for fine throttling of corrosive and ultrapure fluids at low flow rates. Because the seal material is PTFE, these valves are suitable for aggressive chemicals where similar valves with elastomer seals will not stand up.
Ball Valves : SM Series Metering
Chemline Plastics - Control Valves
Chemline SM Series Metering Ball Valve is designed for fine linear flow control of chemicals or clean fluids. The ball is solid with graduated V-groove cut on the outside surface. Precise linear flow control is accomplished through 180 degree rotation of the handle. With a positioning electric actuator, this becomes an inexpensive control valve. If higher Cv values are required, refer to SP Series Proportional ball valves.
LA Series Labcocks
Chemline Plastics - Control Valves
Chemline LA Series Labcocks feature PTFE seats, FKM (Viton) o-ring seals and full 1/4 port. All parts are replaceable. The basic valve is male thread by female thread. Included with each valve are adaptors, plug, O-ring. strap and lockout to provide a variety of end connections. An eyelet is provided for easy valve tagging.