| Power supply |
19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC |
|---|
| Input |
Measurement input: tensometer load cells 4-wire or 6-wire; programmable sensitivity selectable up to 2 mV/V or 4 mV/V; load cells power supply: 4,6 V ± 10%, Imax ~ 60 mA; connections: max. 4 load cells 350 Ohm; Programmable digital input: separated, low level 0V ÷ 1V; high level 10V ÷ 30V (about 5.5 mA @ 24V) |
|---|
| Display |
LED, 6 x 13 mm, red (green - on request) brightness adjustable in 8 steps |
|---|
| Power consumption |
for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 4,5 VA; 19V ÷ 50V DC power supply: max. 4,5 W |
|---|
| Resolution |
10 000 d |
|---|
| Output |
2 x REL Imax=1A, Umax=30V DC/250V AC (cos fi=1) or 2 x OC Imax=30 mA, Umax=30V DC, Pmax=100 mW; transducer power supply: 24 V DC + 5% -10% / max 100 mA; active current: operating range max. 0 - 24 mA, load resistance max 700 Ohm |
|---|
| Communication interface |
RS-485, 8N1 and 8N2, 1200 ÷ 115200 bit/s, Modbus RTU |
|---|
| Protection class |
IP 65 (front side), IP 65 frame for panel cut-out sealing in standard; IP 20 (case and connection clips) |
|---|
| Case material |
NORYL-GFN2S E1 |
|---|
| Operating temperature |
0°C ÷ +50°C (standard), -20°C ÷ +50°C (option) |
|---|
| Storage temperature |
-10°C ÷ +70°C (standard), -20°C ÷ +70°C (option) |
|---|
| Panel cut-out dimensions |
90,5 x 43 mm |
|---|
| Case dimensions |
96 x 48 x 100 mm |
|---|
| Mounting |
panel |
|---|
| Accessories |
SP-4 or SP-6: load cell junction box |
|---|
