Panel Meter : MP5S/MP5Y/MP5W/MP5M Series

Pulse(Rate) Meter

Pulse(Rate) Meter

High performance digital pulse meter MP5 Series supports 13 kinds of operation modes to measure various industrial numerical data including Frequency, Absolute ratio, Passing time and Error ratio. (MP5M Series have 11 operation modes only.) Having diverse functions with various output types, the series could be widely used in any industrial fields. 50kHz of high speed response time is another feature to improve user’s convenience.

*13 kinds of various operation modes :
Revolution, Speed, Frequency, Absolute ratio, Passing time, Error ratio, Period, Density, Passing speed, Error, Time width, Length measurement, Interval, Integration, Multiplication(MP5M Series have 11 operation modes)
*Various output function :
Relay output, NPN/PNP open collector output, Low speed serial output, BCD output, PV transmission, RS485 communication output
*Various functions :
Prescale function, Data monitoring function, Hysteresis width setting function, Max./Min. value monitoring function, Delay function, Auto zero time setting function, Lock setting function, Delay of display period function
*Max. display range : -19999 ~ 99999(MP5M:0~99999)
*Various display units : rpm, rps, Hz, kHz, sec, min, m, mm, mm/s, m/s, m/min, m/h, ℓ/s, ℓ/min, ℓ/h, %, counts, etc.
*Selectable voltage input(PNP) or No voltage input(NPN)
*50kHz High speed response function

Specification Table

Series		MP5S-4N	MP5Y-2□	MP5Y-4□	MP5W-2□	MP5W-4□
Display method		7 Segment LED display(Zero blanking type)
Character size		W4 x H8mm	W6.8 x H13.8mm
Max. indication		-19999 to 99999
Power supply		100-240VAC 50/60Hz	24VDC	100-240VAC 50/60Hz	24VDC	100-240VAC 50/60Hz
Allowable operation voltage		Allowable operation voltage : 90 to 110%
Power consumption		Max. 7.5VA Max. 6W Max. 7VA Max. 7W \|Max. 6VA
Power for external sensor		12VDC ±10%, 80mA
Input frequency		• Solid-state Input: Max. 50kHz(Pulse width : Each over 10㎲) • Contact input: Max. 45Hz(Pulse width : Over 11ms)
Input level		[Voltage input] High : 4.5-24VDC, Low : 0-1.0VDC, Input Impedance : 4.5kΩ [No-voltage Input] Impedance at short-circuit: Max. 300Ω, Residual voltage : Max. 1V, Impedance at open-circuit: Min. 100kΩ
Measuring range		• Mode F1, F2, F7, F8, F9, F10 : 0.0005Hz to 50kHz • Mode F3 : 0.02s to 3,200s • Mode F4, F5, F6 : 0.01s to 3,200s • Mode F11, F12, F13 : 0 to 4 x 10 Count
Measuring accuracy (23 ±5°C)		• Mode F1, F2, F7, F8, F9, F10 : F.S. ±0.05% rdg ±1digit • Mode F3, F4, F5, F6 : F.S. ±0.01% rdg ±1 digit
Display period		0.05 / 0.5 /1 / 2 / 4 / 8sec.(lt Is same with period of output update.)
Operation mode		Number of revolution/Speed/Frequency(F1), Passing speed(F2), Cycle(F3), Passing time(F4), Time width(F5), Time defference(F6), Absolute ratio(F7), Error ratio(F8), Density(F9), Error(F10), Length measurement(F11), lnterval(F12), Multiplication(F13) ※Refer to the M-20 to 23 for the operation mode.
Prescale function		Direct Input method(0.0001x10-8 to 9.9999x109)
Hysteresis※1		0 to 9999
Other functions		• Lock setting function • Auto-Zero time setting function • Time unit selection function • Peak value monitoring function • Memory protection function (Mode F13 applied only)	• Lock setting function • Monitoring delay functionUAuto-zero time setting function • Current output range selectlon(Current output type only) • Comparative output function(HH, H, GO, L, LL) • Time unit selection function • Deviation memory function(F output mode applied only) • Peak value monitoring function • Remote/Local switching function(Communicatlon output type only) • Data bank switching function※2 • Memory protection function(Mode F13 applied only)
Main output	Triple relay	-	-		250VAC 3A resistive load 3a
	Quintuple relay
	NPN Open collector (Quintuple)		12-24VDC 30mA Max.		12-24VDC 20mA Max.
	PNP Open collector (Quintuple)
Sub output	BCD Dynamic	-	NPN Open collector 12-24VDC 30mA Max.		NPN Open collector 12-24VDC 20mA Max.
	Low speed serial output	-	-
	PV transmission	-	DC4-20mA Load 600Ω Max. (Response time : Max. 800ms)		DC4-20mA Load 600Ω Max.
	RS485 communication	-	32 channels, Mutual direction communication function
Memory protection		Non-volatile memory(lnput: Min. 100,000 times)
Insulation resistance		Min. 100MΩ(at 500VDC megger) Between charge part and non-charge part
Dielectric stength		2000VAC 60Hz 1minute(Between terminals of AC power and case, Between terminals of AC power and measuring input terminals)
Impulse noise stength		±2000VAC the square wave noise(pulse width : 1㎲)by the noise simulator, repeat frequency 60Hz
Vibration	Mechanical	0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hour
	Malfunction	0.5mm amplitude at frequency of 10 to 55Hz(for 1 mln.) in each of X, Y, Z directions for 10 minutes
Shock	Mechanical	300m/s²(30G) in each of X, Y, Z directions for 3 times
	Malfunction	100m/s²(10G) in each of X, Y, Z directions for 3 times
Relay life cycle	Malfunction	-	Min. 10,000,000 operations
	Mechanical	-	Min. 100,000 operations(250VAC 3Aload current)
Environ -ment	Ambient temperature	-10 to 50°C, storage : -20 to 60°C
	Ambient humidity	35 to 85%RH, storage : 35 to 85%RH
Unit weight		Approx. 130g	Approx. 135g		Approx. 230g
Approval		CE, UL	-	CE, UL	-	CE, UL

※1: The hysteresis setting range is changed by the setting position of decimal point. (Refer to M-25 for hysteresis function.)
※2: Data bank switching function Is In MP5W series only.

Cr. : http://www.autonics.com/