Indicator : DN500N
- Platform scale, Truck scale,
- Tension/compression tester, Horse weigher,etc.
- 50 kind of parts number can be memorized
- Watch-dog function installed for diagnostics
- Data back up against power stoppage.
- Front display window covered by lexan film for the protecting of dust
- Weighing judgment by over & under setting when printer is connected
- Three kinds of hold function (peak-hold and averagehold, auto-hold)
- Can drive up to 8pcs of load cell (350.)
- RS-232C and CURRENT LOOP standard installed
SPECIFICATIONS
| Specifications | Accuracy |
|---|---|
| Load cell excitation | 10VDC±5%, 320mA |
| Input Signal | 0.5 ~ 3.0mV/V |
| A/D converting speed | 200times/sec |
| A/D converter resolution | 1/520,000 counts(19bits), Δ∑ |
| Non-linearity | 0.01% of full scale |
| Zero adjustment range | -0.6mV~42mV |
| Display Unit | 7 segment, 20.0mm(H)×13.0(W)mm |
| Annunciator | steady, zero, tare, gross, auto, print, hold,Interface |
| Decimal point position | 0, 0.0, 0.00, 0.000 |
| Keyboard | Number key and function key 16 PCS. |
| Temperature-drift | zero ±20PPM/℃, span ±20PPM/℃ |
| Non-linearity | 0.01% of full scale |
| Rear panel | Loadcell input : 5pin connector External control : 12pin input terminal (zero, tare,tare reset/hold/print, gross/hold reset/subprint,Current loop, RS232C) |
| Power | SMPS Free Voltage (85V~265V) |
Option
- Analog Out-put (V-out) : 0~10V
- Analog Out-put (I-out) : 4~20mA
- Serial I / F : RS-422, RS-485
- BCD In-put
- BCD In-out
- RS3232C and Current loop : Standard Installed
DIMENSIONS
