Indicator : DN530N

 

  • Application of Packer, Filler, Hopper, Checker, Limit Scale, etc.
  • Totaling function by Parts.(50 parts)
  • 2 Step Control (SP1, SP2)
  • 6 Control RELAY according to MODE
  • LIMIT, PACKER MODE: (SP1, SP2, FINISH, UNDER NG, OVER NG, ZERO)
  • CHECKER MODE 1, 2, 3 : (SP1[LOW], SP2[HIGH], OK, NG, ZERO)
  • RELAY OUTPUT MODE: LIMIT, PACKER, CHECKER
  • Improved A/D Conversion speed and resolution(Max. 200times, 1/520,000)

 

SPECIFICATIONS

SpecificationsAccuracy
Load cell excitation 10VDC±5%, 320mA
Input Signal 0.5 ~ 3.0mV/V
A/D converting speed 200times/sec
A/D converter resolution 1/520,000 counts(19bits), Δ∑
Non-linearity 0.01% of full scale
Zero adjustment range -0.6mV~42mV
Display Unit 7 segment, 20.0mm(H)×13.0(W)mm
Annunciator steady, zero, tare, Run, SP1, SP2, hold, Interface
Decimal point position 0, 0.0, 0.00, 0.000
Keyboard Number key and function key 12 PCS.
Temperature-drift zero ±20PPM/℃, span ±20PPM/℃
Non-linearity 0.01% of full scale
Rear panel Loadcell input : 5pin connector
External control : 12pin input terminal
(zero, tare, tare reset/hold/print, gross/hold reset/subprint, Current loop,RS232C)
control relay output : 7pin terminal
Power SMPS Free Voltage (85V~265V)

 

Option

  • Analog Out-put (V-out) : 0~10V
  • Analog Out-put (I-out) : 4~20mA
  • Serial I / F : RS-422, RS-485
  • BCD In-put
  • BCD In-out
  • RS3232C and Current loop : Standard Installed

DIMENSIONS

 

 

 

Cr : http://www.dacell.com