Counters/Flow : SPP-94

SPP-94 are the flow meters designed to work in tandem with the pulse flow transducers with current input of 0-20 mA or 4-20 mA. Wide range of total flow (up to 16 significant digits) enables flow volume control for a long time. Build in a batcher function makes possible application of SPP-94 in a wide range of industry branches (food production, pharmacy, paint and varnish).

 

Input measurement: current 0-20 mA or 4-20 mA, overload-protected,sinking current limited to about 40 mA; programmable: binary 24V DC, not separated
Display LED, red (green on request), 6 x 13 mm high
Data memory non-volatile memory, EEPROM type
Displayed values range 0 ÷ 999999 + decimal point
Power consumption for 85 ÷ 260V AC/DC and 16V ÷ 35V AC power supply: max. 4,5 VA; 19V ÷ 50V DC power supply: max. 4,5 W
Output 2 or 4 relay 1A/250V AC (cos fi=1) or OC 30mA/30VDC/100mW; power supply output: 24V DC + 5% -10% / max 100 m; Aative current output: operating range max. 0 - 24 mA, load resistance max. 700 Ohm
Transmission parameters 1200 ÷ 115200 bit/s, 8N1 and 8N2
Communication interface RS-485 / Modbus RTU (not galvanically isolated)
Protection class IP 65 (front), available additional frame IP 65 for panel cut-out sealing; IP 20 (case and connection clips)
Operating temperature 0°C ÷ +50°C (standard), -20°C ÷ +50°C (option)
Case panel mounting
Storage temperature -10°C ÷ +70°C or -20°C ÷ +70°C (depending on version)
Power supply 19V ÷ 50V DC; 16V ÷ 35V AC or 85 ÷ 260V AC/DC
Accuracy current measurement: 0.1% @25°C (for 0÷20 mA range)
Panel cut-out dimensions 90,5 x 43 mm
Case dimensions 96 x 48 x 100 mm
Instantaneous flow unit l or m3 per second, minute or hour
Total flow precision selected from range: 0 ÷ 0.000
Total flow unit I or m3
Instantaneous flow precision selected from range: 0 ÷ 0.00000
Total flow capacity over 4 x 10^9 m3 with max. resistance 0,001 l
Installation depth min 102 mm

 

 

Cr : http://www.simex.pl/en