Temperature transmitters : SPT-86L

 

Parameters

Power supply 24V DC (16 - 30V DC), insulated
Input signal Pt100, Pt500, Pt1000; TC type K, S, J, T, N, R, B, E or milivoltage input: 0-60 mV, 0-75 mV, 0-100 mV, 0-150 mV
Output passive current, range max. 3.4 ÷ 24 mA
Communication interface RS-485, 8N1 and 8N2, 1200 bit/s ÷ 115200 bit/s, Modbus RTU
Protection class IP 20
Operating temperature 0 ÷ +50°C
Storage temperature -10 ÷ +70°C
Accuracy ± 0.1%@25˚C (for TC N: ± 0.2%@25˚C; for TC S, T, R, B: ± 0.5%@25˚C)
Case dimensions 101 x 22,5 x 80 mm
Humidity 0-90%, non-condensing
Min. range depends on input signal
Maximum load 0...(Uz - 9,5V) / 24 mA [kOhm]
Measurement range depends on input signal: -100°C ÷ +600°C for Pt; 100°C ÷ +1820°C (B); -100°C ÷ +1200°C (J); -100°C ÷ +1370°C (K); -100°C ÷ +1300°C (N); -50°C ÷ +1750°C (S); voltage signal 0-60 mV, 0-75 mV, 0-100 mV, 0-150 mV
Mounting DIN rail 35 mm
Software S-Config software for programming directly from PC You can find in section „Download” in upper menu.

 

 

Cr : http://www.simex.pl/en