DUCT TEMPERATURE CONTROLLER : GDC-1100
-"GDC" Proportional Duct temperature Controller is intended to control Duct temperature steadily.
- Operating Voltage : AC 24V
- Heating and Cooling exchanging function
- Built-in temperature transmitter method ( Pt1000 )
- Control Output Signal : 0 ~ 10V DC
Function
-Heating : When the switch is at heating point, Valve is to open in case of duct temperature is lower than setting value.
-Cooling : When the switch is at cooling point, Valve is to open in case of duct temperature is higher than setting value.
Technical Data
|
SUPPLY VOLTAGE |
24V AC.±20% |
|
FREQUENCY |
50 or 60Hz |
|
POWER CONSUMPTION |
0.5 VA |
|
CONTROL RANGE |
0 ~ 50℃ |
|
CONTROL SIGNAL |
0 ~ 10V DC |
|
SENSING ELEMENT |
Pt1000Ω |
|
AMBENT TEMP&HUMI |
1) On Operation : at -15 ~ 70℃, below 95% RH |
|
PROTECTION CLASS |
IP54 |
|
WEIGHT |
0.5Kg(W/BRACKET) |
Technical Design
-This unit is designed for P-control. Based on the differences between detected temperature and pre-set value,
-this controller gives out put signal within 0~10V DC
-A variable is from 0 to 100% A variable is to control signal by means of mutual-proportion relation.
Mounting Notes
Wiring Diagram
Dimension
Cr. : http://www.ginice.co.kr