Flow Meters : FlowX3 F9.60M
The FLOWX3 F9.60M & F9.63M Insertion Magmeters are suitable to measure flowrate in both metal and thermoplastic pipelines.
No moving mechanical parts and the high quality materials allow the measurement of liquids where suspended solids can be present or of abrasive liquids as long as they are conductive and homogeneous.
The sensor can be assembled into the standard FLS fitting range so it is perfectly interchangeable with the paddlewheel sensors.
The new design allows an accurate flow measurement over a wide dynamic range in pipe sizes from DN15 (0.5”) to DN600 (24”).
The F9.60M & F9.63M with built in display provide a local indication of instant flow-rate, permanent and resettable totalizer.
A complete choice of analog and digital outputs plus the bi-directional flow indication make them very complete and updated devices suitable for a wide range of applications.
Main Features
- No moving parts, no wear, maintenance free
- High mechanical resistance
- For DN15 (0.5”) to DN600 (24”) pipes
- Flow Rate Range:
- F9.60M: from 0.05 to 8 m/s (0.15 to 25 ft/s)
- F9.63M: from 0.15 to 8 m/s (0.5 to 25 ft/s). - Accurate measurement of dirty liquids
- Bi-directional flow measurement (F9.60M only).
- Low pressure drop.
- Special versions for salt-water applications (high concentrations of chlorides like sea water) and for high temperature conditions
Applications
- Water and waste water treatment
- Raw water intake
- Industrial water distribution
- Textile industry
- Pools, spas and aquariums
- HVAC
- Chemical industry
- Metal treatments
- Processing and manufacturing industry
- Sea water applications.
Applications
- Water and waste water treatment
- Raw water intake
- Industrial water distribution
- Textile industry
- Pools, spas and aquariums
- HVAC
- Chemical industry
- Metal treatments
- Processing and manufacturing industry
- Sea water applications.
Downloads
- Data sheets [261 KB]
- CE Conformity [173 KB]
- Instruction Manual_EN - F9.60M [4.283 KB]
- Instruction Manual_EN - F9.63M [4.480 KB]
Compatible Instrumentation