Level Controller : DPC - 10

Daehan Sensor | Level Sensing Instrument

2-Wire Connect (Current Loop) DC 24V Power Supply Percent(%), Length(mm) Volume(ℓ) Indicat Alram - 2ea (High/Low) Control - 1ea (On/Off)

Float Type Level Controller

Application

This DPC-10 Series Level Controller gets 4-20mA current signal output from the sensor installed in the tank and displays the level of the liquid in the tank as percentage (0~100%) at 0.1 unit, length of mm, or volume of liter.

User can select one 4~20mA Analog Output (Meter), two Alarm Relays, or one Control Relay as per user's purpose and circumstance.

It is easy to read the values even in dark place or long distance for a 5-digit 7-segment LED is installed on the front panel.

Also, it is able to monitor the status at site without using meter.

You can change the display by using the fie keys on the front panel including Reset.

It keeps all of the current value set by the user, even when the power is turned off because it is stored in the internal non-volatile memory.

Features

▶ DC 24V Power Supply.

▶ %, mm, liter - display .

▶ 2ea Alram, 1ea Control.

General Specifications

Display	3 Digit 8.0mm (0.315 Inch) High 7-Segment L.E.D
Display Update Rate	0.25 Sec
Transducer Supply	24 VDC , 59mA
Operating Temperature	0℃ ~ 80℃
Demensions	96mm (Wide) , 96mm (High) , 100mm (Deep)
Cutout	92mm ±0.2mm (Wide) , 92mm ±0.2mm (High)
Resolution	8 bit
Accuracy	less then 0.1%
Relay Output - Max. Switching Current Capacitor	1250VA, 150W
Relay Output - Max. Switching Voltage	250VAC, 30VDC
Relay Output - Max. Switching Current	5A

Material	Polcarbonate & A.B.S

ㆍPlan

Cr : http://www.dh34.com