Level Controller : DFC - 4U - 2W

2-Wire Connect (Current Loop) High/Low/Buzzer Alram Control On/Off L.E.D Lamp Indicating

Float Type Level Controller     

 

Application

This DFC-4U-2W Series Level Controller gets signal from each point of the sensor installed in the tank and displays the level of the liquid in the tank as points.

Using a converter for 2-wire transmission, this changes contact signal to current.

LED display enables you to read the current status correctly and easily. This is designed to control two alarms and one of control which activates the connected pump.

In the mode of drainage, if it does not stop at the HIHG set-point, HIGH alarm turns on. 

If it does not stop at the LOW set-point, LOW alarm turns on.

 

Features

 ▶ L.E.D Dispaly.

 ▶ 2-Wire (Current Loop)

 ▶ 2ea Alram, 1ea Buzzer, 1ea Control.

 

General Specifications

Indicate  (Red) L.E.D Lamp
Operating Temperature  0℃ ~ 60℃
Demensions  87mm (Wide) , 155mm (High) , 69mm (Deep)
Relay Output  -  Max. Switching Current Capacitor  1250VA, 150W
Relay Output  -  Max. Switching Voltage  250VAC, 30VDC
Relay Output  -  Max. Switching Current  5A
   
Material  Polcarbonate & A.B.S

 

ㆍPlan

 

 

Cr : http://www.dh34.com