Level Controller : DLC - 3M
Quick Type Level Controller
Application
This DLC-3M Series Level Controller gets signal from each point of the sensor installed in the tankand displays the level of the liquid in the tank as points.
It is very much easy to install and do the wiring.
The convertor of DQ-5S is used to transmit via 2-wire type, which converts contact signal of ball sensor to current.
It is easy to read the current status of ball sensor since it has LED.
It is designed to control three pumps sequentially or alternatively and two alarms.
Sequential control means that pump 1 always operates before pump 2.
Alternative control means that pump 1 and pump 2 operates in turn which extends life of the pumps.
DLC-3M product is set for alternative control mode of drainage.
Features
▶ L.E.D Display.
▶ 2ea Alram, 1ea Buzzer, 3ea Pump Control.
General Specifications
| Indicate | (Red) L.E.D Lamp |
| Operating Temperature | 0℃ ~ 60℃ |
| Demensions | 87mm (Wide) , 155mm (High) , 69mm (Deep) |
| Relay Output - Max. Switching Current Capacitor | 1250VA, 150W |
| Relay Output - Max. Switching Voltage | 250VAC, 30VDC |
| Relay Output - Max. Switching Current | 5A |
| Material | Polcarbonate & A.B.S |
ㆍPlan
 |
Cr : http://www.dh34.com